Amika-Febe

Food-grade aluminum EN 601: The boiler and upper part are made of EN 601-certified aluminum, compliant with Italian and European food safety standards.
Manufacturing quality in accordance with EN 13248.

Laser-perforated filter plate: Made of stainless steel and perforated using laser technology.

Handle and knob: Made of Nylon 6.

In accordance with Directive 2011/83/EU and the Italian Consumer Code (Legislative Decree 206/2005), the consumer has the right to withdraw from the purchase contract within 14 days from receipt of the goods, without the need to provide any reason and without incurring any penalty.

Conditions for exercising the right of withdrawal
The product may be opened and handled solely to assess its nature, characteristics and functioning, as would be possible in a physical retail store.

The consumer is responsible for any reduction in value of the goods resulting from use beyond what is necessary to determine their suitability.

Packaging and product condition
The product must be returned undamaged, complete with all components (including accessories, manuals, etc.), and properly packaged to prevent damage during transport.

While the original packaging is not mandatory, we recommend preserving and using it, whenever possible, to ensure adequate protection of the product.

The seller cannot refuse the return solely due to the absence of the original packaging, but reserves the right to withhold part of the refund if the product is returned damaged or incomplete.

Refund methods and timing
The refund, including standard shipping costs, will be issued within 14 days from the notification of withdrawal, using the same payment method chosen by the consumer. The seller may withhold the refund until the goods have been received or until proof of shipment is provided by the consumer.

Return shipping costs
The direct cost of returning the goods is borne by the consumer.

Febe 1 cup - Length 12 × Height 15 × Depth 9 cm - Kg 0,316

Febe 3 cups - Length 13,5 × Height 18 × Depth 11,5 cm - kg 0,458

USE INSTRUCTIONS

Fill the boiler with cold water up to—but not beyond—the bottom edge of the safety valve.

Insert the funnel into the boiler and fill it with coffee grounds, without pressing, up to the edge. Remove any coffee residue from the boiler rim.

Screw the top chamber onto the boiler firmly, but not excessively, and without applying pressure on the handle.

Place the moka pot on the heat source. If using an open flame, make sure it does not extend beyond the edge of the boiler.

Once brewing is complete, do not leave the moka pot on the heat source, as this could cause permanent damage.

CARE

Ensure the moka pot is intact and all components are present: the safety valve, coffee funnel, gasket, and filter plate.

For the first use, discard the first three coffees to ensure all parts are clean.

Never unscrew the moka pot before it has completely cooled down.

Do not touch the hot surface—use the handle and knob.

Keep the moka pot out of children's reach during use.

During heating, make sure the safety valve is not directed toward the user.

Do not wash in the dishwasher.

Wash using only water—do not use detergents. Avoid steel wool or abrasive products.

Never use the moka pot without water in the boiler.

The boiler should be filled exclusively with water—do not use other liquids.

Do not use other infusions (such as cocoa powder, chamomile, etc.), which may clog the filter.

Store the moka pot only when completely dry and without fully tightening the parts.

MAINTENANCE
• Periodically check the condition of the gasket and coffee funnel. Replace if worn or damaged.
• Check regularly that the filter holes are not blocked. If clogged, clear them with a pin or small brush; otherwise, replace the filter with an original one.
• Original spare parts are available in special packages from authorized dealers. Avoid using non-original replacements.